Pioneer SPH-T20BT Manual Del Propietário página 7

Front of the spacer
Fixing the upper side
5
Connect the cable to the connector located on the back of the
holder.
CAUTION
Insert the connector with the protruding surface ( ) facing down.
If you insert it upside down forcibly, it may break.
Back of the spacer
Fixing the lower side
6
Align the main unit with the slots on the back of the holder and
push the cable back into the main unit (3 fixing points).
7
Fix the unit and holder with the 4 supplied screws.
NOTES
• When you align the holder, spacer, and slots of the main unit, the screw
holes will be aligned.
• If the screws do not fit, return to step 4 and reattach the parts.
7
En