Product Exterior; 41910-Ht0 Transmitter - Leviton 41910-HT0 Manual De Instrucciones

HDBaseT Extender – 70M

2. Product Exterior

2.1 41910-HT0 Transmitter

1) ON: Blinks green when the device is operational; turns off when the device stops
working.
2) LINK: Twisted Pair cable link status indicator, illuminates green when the
connection between the transmitter and receiver is successful.
3) IN: HDCP compliance indicator, solid green when the connected device supports
HDCP and works normally; blinks green when the connected device does not
support HDCP.
4) POWER LED: Illuminates red when the power is on.
5) HDBT OUT: Connect to the HDBT IN port of an HDBaseT certified receiver with a
twisted pair cable.
6) HDMI IN: Connect to HDMI source.
Threaded insert for locking connector is M3 – 0.5mm (kit sold separately
a)
41900-LKT)
7) IR IN: Connect with an IR target (sold separated 41910-HIR)
8) IR OUT: Connect with an IR emitter (sold separately 41910-HIR)
9) RS232: Serial pass through
10) DC 24V: Connect with the included power supply (can be placed at transmit or
receive end).
Leviton Manufacturing Co.
1
6 7
5
PoH
5
2 3 4
10
8 9
PK-A3064-10-02-5A
www.leviton.com