41910-Ht0 Receiver - Leviton 41910-HT0 Manual De Instrucciones

HDBaseT Extender – 70M

2.2 41910-HT0 Receiver

1) ON: Blinks green when the device is operational; turns off when the device stops
working.
2) LINK: Twisted Pair link status indicator, illuminates green when the connection
between the two devices is successful.
3) OUT: HDCP compliance indicator, illuminates green when the connected device
supports HDCP and works normally; blinks green when the connected device does
not support HDCP.
4) POWER LED: Illuminates red when the power is on.
5) HDBT IN: Connect to the HDBT OUT port of an HDBaseT certified transmitter with
a twisted pair cable.
6) HDMI OUT: Connect to an HDMI display device.
Threaded insert for locking connector is M3 – 0.5mm (kit sold separately
a)
41900-LKT)
7) IR IN: Connect with an IR target (sold separately 41910-HIR).
8) IR OUT: Connect with an IR emitter (sold separately 41910-HIR).
9) RS232: Serial pass-through
10) DC 24V: Connect with the included power supply (can be placed at transmit or
receive end).
Leviton Manufacturing Co.
1
5
6 7
PoH
6
2 3 4
10
8 9
PK-A3064-10-02-5A
www.leviton.com