Meter Memory; Reviewing Test Results; Reviewing Blood Glucose Day Averaged Results; Download Application - VISIOMED bewell connect MyGluco BW-GL1 Manual De Instrucciones

8. METER MEMORY

The meter stores the 450 most recent blood glucose test results along with respec-
tive dates and times in its memory. To enter the meter memory, start with the meter
switched off.

8.1. REVIEWING TEST RESULTS

1. Press and release M.
" " will appear on the display. Press M again, and the first reading you see is the
last blood glucose result along with date, time and the measuring mode.
2. Press UP or DOWN to recall the test results stored in the meter each time you
press. After the last test result, press M again and the meter will be turned off.

8.2. REVIEWING BLOOD GLUCOSE DAY AVERAGED RESULTS

1. Press and release M. When "
seconds until the flashing "
result measured in general mode will appear on the display.
2. Press M to review 14-, 21-, 28-, 60- and 90- day average results stored in memory.
3. Exit the meter memory.
Keep pressing the M and the meter will turn off after displaying the last test result.
NOTE:
• Any time you wish to exit the memory, keep pressing M for 5 seconds or leave it without any
action for 3 minutes. The meter will switch off automatically.
• Control solution results are NOT included in the day average.

DOWNLOAD APPLICATION

BW-GL1 can also be used in conjunction with the BewellConnect® application, available on
the APP Store and Play Store for free download.
The following information may be modified.
Download the BewellConnect® app on your mobile or tablet :
- App store or Google Play
- scan the QR Code on the side of the box
Then click on the MyGluco icon.
It is simple and intuitive to use, for better understanding of your current condition and to
achieve better diabetes control.
System Requirement : iOS (7 or above) / Android (4.2 or above)
" appears. Release M and then your 7-day average
BewellConnect - BW-GL1 - User Manual - 022017v1
" appears on the display, keep pressing M for 3
17