Pulse Mode Feature; Ingredient Cap; Soft Start™ Blending Feature - KitchenAid KSB560 Instrucciones Y Recetas

pulse Mode feature

Your KitchenAid Blender offers Pulse
®
Mode, which allows a "Pulse-at-any-
Speed" feature.
NotE: Pulse Mode will not work with the
Crush Ice feature.
1. Before operating the Blender, make
sure the pitcher is properly in place on
the Blender base.
2. Put ingredients into pitcher, and firmly
attach lid.
3. Press PULSE MODE. The indicator
light above the button will blink to
indicate that all five speeds are in the
Pulse Mode.
4. Select a speed button. Press and hold
for the desired length of time. Both
the speed button and Pulse Mode
indicators will stay lit when pulsing at
the selected speed. When button is
released, the blending will stop, but
the Blender will remain in Pulse Mode
and the Pulse Mode indicator will
return to blinking. To pulse again or at
another speed, simply press and hold
the button of the desired speed.
using the Blender
5. To turn off the Pulse Mode feature,
6. Before removing the pitcher, press OFF

Ingredient cap

The 2 oz. (60 mL) ingredient cap can be
used to measure and add ingredients.
Remove cap and add ingredients at STIR,
CHOP or MIx speeds. When operating at
higher speeds, with a full
pitcher or with hot contents,
stop the Blender and then
add ingredients.
soft start™ Blending feature
The Soft Start™ blending feature
automatically starts the Blender at a lower
speed to draw ingredients into the blades,
then quickly increases to the selected
speed for optimal performance.
NotE: The Soft Start™ blending feature
only works when a speed is selected from
the "Off" mode. The Soft Start™ feature
does not work with Pulse Mode or
Crush Ice.
10
press OFF. The Blender is now ready for
continuous operation.
to deactivate the Blender, and unplug
the power cord.