Denon DVD-2800II Instrucciones De Operación página 43

Use the • and ª cursor buttons to select the desired
setting, then press the ENTER button.
q When "1. DIGITAL OUT" is selected:
NORMAL (Factory default)
Select this to listen to the digital audio output
signals output from the digital audio output
terminals (optical/coaxial) when playing DVDs
recorded in Dolby Digital or DTS.
PCM
Select this to listen to the digital audio output
signals output from the digital audio output
terminals (optical/coaxial) when playing DVDs
recorded in linear PCM.
OFF
When "OFF" is selected, analog signals are
output from the set's analog audio output.
Digital signals are not output from the digital
audio output at this time.
To exit the digital out mode
Use the • and ª cursor buttons to select "AUDIO
SETUP", then press the ENTER button.
Press RETURN button, you can go back to the
previous screen.
w When "2. LPCM SELECT (96 kHz / 48 kHz)" is
4
selected:
This setting is valid when "NORMAL" or "PCM"
is selected for "1. DIGITAL OUT".
OFF (Factory default)
Only linear PCM audio signals recorded at 48
kHz/16 bits are output from the digital output
terminals.
When playing DVDs containing 48 kHz/20 or 24
bit or 96 kHz linear PCM audio signals, nothing is
output from the digital output terminals.
For DVDs on which no copyright protection
measures are taken, however, the audio signals
are output in the format in which they were
recorded.
ON (96 kHz Æ Æ 48 kHz)
When playing DVDs containing 48 kHz/20 or 24
bit or 96 kHz linear PCM audio signals, the
signals are converted into 48 kHz/16 bit signals
and output from the digital output terminals.
(In consideration of copyrights, the actual PCM
audio digital output is under 48 kHz/16 bits.)
To exit the LPCM select mode
Use the • and ª cursor buttons to select "AUDIO
SETUP", then press the ENTER button.
Press RETURN button, you can go back to the
previous screen.
1. D I G I TAL OUT
> AUD I O SE TUP
Remote control unit
> MAI N PAGE
ENTER
DIGITAL OUT - -> NORMA L
SELECT :
Remote control unit
2. L PCM SE L ECT
( 9 6 kHz --> 48kHz)
> AUD I O SE TUP
Remote control unit
> MAI N PAGE
ENTER
LPCM SELECT --> OFF
SELECT :
Remote control unit
ENGLISH
B
D I G I TAL OUT
NORMA L
PCM
OFF
DEC I S ION: ENTER BUTTON
B
LPCM SE L ECT
OF F
ON
DEC I S ION: ENTER BUTTON
43