Braun 797cc-7 Serie Manual Del Usuario página 14

CLEAN&RENEW STATION
Shaving system
is still wet
after cleaning
Program
has been
completed.
Cleaning does
not start when
pressing the
start button.
Increased
consumption of
cleaning fluid.
14
1. Drain of the Cle-
an&Renew station is
clogged.
2. Cleaning cartridge
has been used for
quite a while.
1. Shaver is not placed
properly in the
Clean&Renew station.
2. Cleaning cartridge
contains not enough
cleaning fluid (display
lights red).
3. Appliance is in
stand-by mode.
Drain of the Clean&Re-
new station
is clogged.
1. Clean the drain with a wooden
toothpick. Regularly wipe the
tub clean.
2. The ethanol proportion has
decreased while the oil
proportion has increased.
Remove residue with a cloth.
1. Insert shaver into the Clean&Re-
new station (contacts of the
shaver need to align with
contacts in the station).
2. Insert new cleaning cartridge.
3. Press start button again.
– Clean the drain with a wooden
toothpick.
– Regularly wipe the tub clean.