Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Hygiene segments:
All 6 hygiene segments will appear after the
shaver has been cleaned in the Clean&Renew
station. When the shaver is being used, the
hygiene segments will gradually disappear.
Once the shaver is returned to the station, the
system will automatically select the appropriate
cleaning program and restore the segments
to maximum hygiene. Given that rinsing the
shaver under tap water is not as hygienic as the
cleaning station, the hygiene segments will only
restore themselves when the shaver has been
cleaned in the Clean&Renew station.
Charging information
• A full charge will take about 1 hour and
provides up to 50 minutes of cordless shaving
time. This may vary according to your beard
growth and environmental temperature.
5-minute quick charge is suffi cient for a shave.
• Recommended ambient temperature for
charging is 41 °F to 95 °F / 5 °C to 35 °C.
The battery may not charge properly or at
all under extreme low or high temperatures.
Recommended ambient temperature for
shaving is 60 °F to 95 °F / 15 °C to 35 °C.
Do not expose the shaver to temperatures
higher than 122 °F / 50 °C for extended
periods of time.

Using the shaver

Personalizing your shaver
By holding down the accelerator button –/+
e
r
(
or
) you can adjust the shaving power to
your individual needs in the different areas of
your face from sensitive to intensive. The pilot
light in the start button
following range:
(–) sensitive shave
– light blue (level 1)
– dark blue (level 2, 3, 4)
– green (level 5)
(+) intensive/turbo shave
For a thorough and fast shave we recommend
the green (intensive) setting. When switching on
next time, the last used setting will be activated.
w
changes within the
9

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

5696

Tabla de contenido