EAS ELECTRIC 52 Manual De Usuario página 137

Remote LCD Screen Indicators
Information are displayed when the remote controller is powered up.
ON/OFF display
Appears when the unit
is turned on, and disappears
Transmission Indicator
when the it is turned off.
Lights up when remote
sends signal to indoor
unit
Lock Indicator
Lights up when Lock
feature is activated.
MODE display
Displays the current
mode, including:
TIMER ON display
( )
Displays when TIMER
ON is set
TIMER OFF display
( )
Displays when TIMER
OFF is set
Silence feature
display
Follow me feature
display
Note:
All indicators shown in the figure are for the purpose of clear presentation. But during the actual
operation only the relative functional signs are shown on the display window.
V.1
Displays when ECO feature
is activated (Applicable to
model RG6BB7(B)/BGEF only)
Battery display
Low battery detection
Temperature/Timer display
Displays the set temperature
by default, or timer setting
when using TIMER ON/OFF
functions
Temperature range:
o
17-30 C
Timer setting range:
0-24 hours
This display is blank when
operating in FAN mode.
Fan speed display
Displays selected fan speed:
Low speed
Not available for
Medium speed
this unit
High speed
Not available for
this unit
Sleep mode display
Auto fan speed
This fan speed can not be
adjusted in AUTO or DRY
mode.
5
How To Use The Basic Functions
3
2
1
FAN
MODE ON/OFF
Slide down the
front cover
COOL operation
1. Press the MODE button to select
COOL mode.
2. Set your desired temperature using
the Temp or Temp button.
3. Press the FAN button to select the
fan speed.
4. Press the ON/OFF button to start the
unit.
SETTING TEMPERATURE
The operating temperature range for units is
O
17-30 C. You can increase or decrease the
O
set temperature in 1 C increments.
AUTO operation
In AUTO mode, the unit will automatically
select the COOL, FAN, HEAT or DRY mode
based on the set temperature.
1. Press the MODE button to select Auto mode.
2. Set your desired temperature using the
Temp or Temp button.
3. Press the ON/OFF button to start the unit.
,
NOTE: FAN SPEED can t be set in Auto mode.
4
2
1
MODE ON/OFF FAN
3
6
V.1