WEG IOC-01 Guía De Instalación, Configuración Y Operación página 9

XC1:13
(24 Vdc)
XC1:11
R ≥ 500 Ω
L
(DGND*)
* It is possible to insert the accessory on slots 1 and 2 on the PLC300. The digital inputs and outputs are represented by DI10X/DO10X
(Slot 1) and DI20X/DO20X (Slot 2).
Figure 6: IOC-02 – XC16 Terminal strip – Digital inputs as active high
XC16 PLC300(*)
1 DI9 DI101/DI201
2 DI10 DI102/DI202
3 DI11 DI103/DI203
4 DI12 DI104/DI204
5 DI13 DI105/DI205
6 DI14 DI106/DI206
7 DI15 DI107/DI207
8 DI16 DI108/DI208
9 COM COM
10 DO6 DO101/DO201 Transistor Output 6
11 DO7 DO102/DO202 Transistor Output 7
12 DO8 DO103/DO203 Transistor Output 8
13 DO9 DO104/DO204 Transistor Output 9
14 DO10 DO105/DO205 Transistor Output 10
15 DO11 DO106/DO206 Transistor Output 11
16 DO12 DO107/DO207 Transistor Output 12
17 DO13 DO108/DO208 Transistor Output 13
18 24 Vdc 24 Vcc
Installation, Configuration and operation guide
Function
Digital Input 9
Digital Input 10
Digital Input 11
Digital Input 12
Digital Input 13
Digital Input 14
Digital Input 15
Digital Input 16
Common point of the
digital inputs
24 Vdc power suply
Specifications
8 isolated digital inputs
High level ≥ 18 V
Low level ≤ 3 V
Input voltage ≤ 30 V
Input current: 11 mA @
24 Vdc
8 isolated digital outputs,
open collector with
freewheel diode
Maximum voltage: 24 V
Maximum current: 50 mA
24 Vdc power suply, ± 8 %.
Capacity: 500 mA
9