Technical Specifications; Connection And Indications - WEG IOC-01 Guía De Instalación, Configuración Y Operación

5. TECHNICAL SPECIFICATIONS

5.1 CONNECTION AND INDICATIONS

CC11 Control
* It is possible to insert the accessory on slots 1 and 2 on the PLC300. The digital inputs and outputs are represented by DI10X/DO10X
(Slot 1) and DI20X/DO20X (Slot 2).
Figure 4: IOC-01– XC15 Terminal strip - Digital inputs as active high
XC15 PLC300(*)
1 DI9 DI101/DI201
2 DI10 DI102/DI202
3 DI11 DI103/DI203
4 DI12 DI104/DI204
5 DI13 DI105/DI205
6 DI14 DI106/DI206
7 DI15 DI107/DI207
8 DI16 DI108/DI208
9 COM COM
10 NA6 NA101/NA201
11 C6 C101/C201
12 NA7 NA102/NA202
13 C7 C102/C202
14 NA8 NA103/NA203
15 C8 C103/C203
16 NA9 NA104/NA204
17 C9 C104/C204
18 NC NC
Installation, Configuration and operation guide
Function
Digital Input 9
Digital Input 10
Digital Input 11
Digital Input 12
Digital Input 13
Digital Input 14
Digital Input 15
Digital Input 16
Common point of the
digital inputs
Digital Output 6 DO6 (RL6)
Digital Output 7 DO7 (RL7)
Digital Output 8 DO8 (RL8)
Digital Output 9 DO9 (RL9)
Specifications
8 isolated digital inputs
High level ≥ 18 V
Low level ≤ 3 V
Input voltage ≤ 30 V
Input current: 11 mA @
24 Vdc
Contact rating:
Maximum voltage: 240 Vac
Maximum current:1 A
NO - Normally open
contact
C - Common
7