Description Of Symbols; General Safety; Environmental Protection - Silverline 846386 Manual De Instrucciones

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has
unique features and, even if you are familiar with similar products, it is necessary
to read this manual carefully to ensure you fully understand the instructions.
Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Do not use in rain or damp environments
Risk of electrocution
Danger of toxic welding fumes
Danger of ultraviolet radiation
Danger hot Surfaces
Danger of Fire
Caution!
Class I construction (protective earth)
Conforms to relevant legislation and safety standards

Environmental Protection

Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with
your local authority or retailer for recycling advice
4
Original Instructions
Specification
Input voltage: ................................................................230V~ 50Hz
Mains connection: ...................................................................... 16A
Input current: .......................... 230V: 17.2A (peak), 12.1A (effective)
Output current range: ..........................................................25-100A
Rated duty cycle: ....................................50% @ 100A, 60% @ 91A,
No load output voltage: ...............................................................60V
Output voltage:.............................................. 22.8V(71A), 24V(100A)
Electrode rod size:........................................................ 1.6 – 3.2mm
Insulation class: ............................................................................. H
Ingress protection: .................................................................. IP21S
Welding thickness range (steel):......................................... 1 – 6mm
Protection class: .........................................................................
Electrode cable length: ............................................................. 2.0m
Earth cable length: ................................................................... 1.5m
Power cable length: ................................................................. 2.0m
Dimensions (L x W x H): ....................................350 x 140 x 240mm
Weight:.....................................................................................4.6kg
As part of our ongoing product development,
specifications of Silverline products may alter without notice.

General Safety

WARNING! When using electric power tools, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and personal injury
including the following safety information. Read all these instructions before
attempting to operate this product and save these instructions for future use.
WARNING: This appliance is not intended for use by persons (including children)
with reduced, physical or mental capabilities or lack of experience or knowledge
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children must be supervised to
ensure that they do not play with the appliance.
CAUTION: Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the work to
be performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1 - Keep work area clear - Cluttered areas and benches invite injuries
2 - Consider work area environment
- Do not expose tools to rain
- Do not use tools in damp or wet locations
- Keep work area well lit
- Do not use tools in the presence of flammable liquids or gases
3 - Guard against electric shock - Avoid body contact with earthed or
grounded surfaces (e.g. pipes, radiators, ranges, refrigerators)
4 - Keep other persons away - Do not let persons, especially children,
not involved in the work touch the tool or the extension cord and keep
them away from the work area
5 - Store idle tools - When not in use, tools should be stored in a dry
locked-up place, out of reach of children
6 - Do not force the tool - It will perform the job better and safer at the
rate for which it was intended
7 - Use the right tool - Do not force small tools to do the job of a heavy
duty tool
Do not use tools for purposes for which they are not intended; for
example do not use circular saws to cut tree limbs or logs
100% @ 71A