Step 24
Attach one table bracket to the gas grill
bottom using two M6 x 15 mm bolts,
M6 lock washers and M6 flat washers.
Repeat for other table bracket.
Step 25
Attach small U-bolt to the gas grill
bottom using two pre-attached
M4 nuts, M4 flat washers and M4 lock
washers. U-bolt should angle upward.
Step 26
Attach foldable table to table bracket
using two M6 silver shoulder bolts from
the parts list and M6 lock nuts from the
component card.
M6 Silver Shoulder Bolts
Foldable Table
47
M6 Lock Nut
Folding Table Brackets
Trailer Frame
Small U-Bolt
Table Brackets
Side Table
Gas Grill Bottom