Connecting The Power Cord - Pioneer DEH-P8100BT Manual De Instalación

Connecting the units

Connecting the power cord

Note
Depending on the kind of vehicle,
the function of 3* and 5* may be
different. In this case, be sure to
connect 2* to 5* and 4* to 3*.
1*
3*
5*
Cap (1*)
Do not remove cap if
this terminal is not in
use.
Yellow (3*)
Back-up (or
accessory)
Red (5*)
Accessory (or
back-up)
ISO connector
Note
In some vehicles, the ISO connector may
be divided into two. In this case, be sure to
connect to both connectors.
4
USB cable
Use supplied USB cable or separately
sold USB cable (CD-U150E).
iPod to USB connection cable
Use separately sold iPod to USB
connection cable (CD-IU50).
2*
Microphone
4*
Connect leads of the same
color to each other.
Yellow (2*)
Connect to the constant 12 V
supply terminal.
Red (4*)
Connect to terminal controlled by
ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
Microphone input
4 m
Fuse (10 A)
Fuse resister
Note
When using a subwoofer of 70 W (2
Ω), be sure to connect with Violet
and Violet/black leads of this unit.
Do not connect anything with Green
and Green/black leads.
15 cm
Fuse resister