Nice Era Star A Serie Instrucciones Y Advertencias Para La Instalación Y El Uso página 2

Quick Guide
Era Star A
1 - Electrical connections
1
2
C
3
4
2 - Programming the limit switches "0" and "1" in MANUAL mode
The high limit switch (0) or the low limit switch (1) can be memorised at the beginning according to your needs.
01 02
Press until...
04
Press until...
3 - Programming the limit switches "0" and "1" in SEMI-AUTOMATIC mode
Caution! • This program-
ming is recommended for
shutters with a single me-
chanical safety stop: for
example, the plugs for lim-
it switch "0" or alternative-
ly the anti-intruder springs
on limit switch "1". • The
example alongside shows
a shutter equipped only
with safety plugs for lim-
it switch "0". • The first
limit switch to be pro-
grammed must be the
version with the me-
chanical stop.
4 - Programming the limit switches "0" and "1" in AUTOMATIC mode
01 02
Press until...
5 - Deleting the entire memory
01 01
Press together
IS0084A02MM_23-03-2015
tubular motor for
shutters
- ref. chapter 4
FUSE
Limit position required ("1")
Limit position required ("0")
01 02
Press until...
03
Press until... Limit position required ("1")
"0"
Automatic limit position ("0")
- ref. paragraph 6.5
1
Movements (n° 1)
N L
Cable Colour
1 Brown
2 Black
3 Blue
4 Yellow-green
03
"1"
sec.
Press together (5s)
05
"0"
5
sec.
Press together (5s)
"0"
Automatic limit position ("0")
"1"
Press together (5s)
03
Release Press until...
02
Release
Note for consultation • In this Guide,
the numbering system is independent
and does not correspond to the num-
bering stated in the text of the com-
plete manual. • This guide does not re-
place the complete manual.
Connection
Electric ascent/descent phase
Electric descent/ascent phase
Common (usually connected to Neutral)
Earth (equipotential bonding connection).
Cable not present on series "E Star SA" motors.
- ref. paragraph 6.2
1
5
Movements (n° 1)
1
Movements (n° 1) Release together
- ref. paragraph 6.3
Release
1
5
sec.
Movements (n° 1) Release together
- ref. paragraph 6.1
"1"
Automatic limit position ("1")
03
x 3
Press 3 times Release
Release together
Release