Midi Implementation Chart V2.0 - Axon AX 100 MKII Manual De Instrucciones

Tabla de contenido

Publicidad

Manufacturer: TerraTec Electronic GmbH
1. Basic Information
MIDI channels
Note numbers
Program Change
Bank Select response? (Yes/No)
If yes, banks utilized
Modes Supported (Yes/No)
Multi (Mode 5)
Poly (Mode 3)
Omni (Mode 1)
Mono (Mode 2)
"Guitar" (Mode 4)
Note On Velocity (Yes/No)
Note Off Velocity (Yes/No)
Channel Aftertouch (Yes/No)
Poly (Key) Aftertouch (Yes/No)
Pitch Bend (Yes/No)
Active Sensing (Yes/No)
System Reset (Yes/No)
Tune Request (Yes/No)
System Exclusive messages supported (Yes/No)
Sample Dump Standard
Device Inquiry (General Information)
File Dump
MIDI Tuning
Master Volume
Master Balance
Notation Information
Turn GM System On
Turn GM System Off
Other (note in Remarks column)
NRPNs (Yes/No)
RPN 00 (Pitch Bend Sensitivity) (Yes/No)
RPN 01 (Fine Tuning) (Yes/No)
RPN 02 (Coarse Tuning) (Yes/No)
RPN 03 (Tuning Program Select) (Yes/No)
RPN 04 (Tuning Bank Select) (Yes/No)
2. MIDI Timing and Synchronization
MIDI Clock (Yes/No)
Song Position Pointer (Yes/No)
Song Select (Yes/No)
Start (Yes/No)
Continue (Yes/No)
Stop (Yes/No)
MIDI Time Code (Yes/No)
MIDI Machine Control (Yes/No)
MIDI Show Control (Yes/No)
If yes, MSC Level supported
3. Extensions Compatibility
General MIDI compatible? (Yes/No)
If yes, is GM default power-up mode?
(Yes/No)
DLS compatible? (Yes/No)
If yes, DLS Level(s) supported
If yes, can DLS files be imported? (Yes/No)
If yes, can DLS files be exported? (Yes/No)
Importation of Standard MIDI Files (Yes/No)
If yes, Types supported
Exportation of Standard MIDI Files (Yes/No)
NOTES
1) Only recognized when Local Mode = Off. 2) Recognized on any channel when Local Mode = Off. Recognized on Basic/Hold channel
only when Local Mode = On. In this case the controller is ignored if it is already assigned internally. It is re-transmitted on the incoming
channel when Stringmode = Common. It is re-transmitted on the incoming channel and the 5 following channels when Stringmode =
Separate 3) Any Controller between 0 and 119 can be transmitted when assigned to a Wheel/Pedal or used with the Pickcontrol feature.
In this table "Transmitted" is only marked with "Yes" if the controller has a function additional to these assignments. 4) The effective
Volume/Pan value depends not only on the incoming controller value, but also on several internal parameters
62

MIDI Implementation Chart v2.0

Model: AXON AX 100 MKII
Transmitted
1-6, 10, 11-16
0-126
0-127
Yes
No
Yes
No
Yes
No
No
No
No
No
No
No
No
No
No
No
No
Yes
No
Yes
Yes
No
No
No
Yes
No
No
Yes
No
Yes
No
No
No
Version: 7.xx
Recognized
1, 11 / 1-16 1)
Default Values; Channels 1-16 can be used
0-127 1)
0-127
Mapped to Presets when Local Mode = On
Yes 1)
MSB only, see Patchlist
Yes 1)
Yes 1)
No 1)
No 1)
Yes 1)
Yes 1)
No
Yes 1)
No
Yes 1)
No
Yes 1)
No
No
No
No
No
Yes 1)
No
No
Yes 1)
No
Yes
Described in "MIDI SysEx Implementation"
Yes 2)
Described in "Table of NRPN Controllers"
Yes 1)
Yes 1)
Yes 1)
No
No
Yes
Used for Arpeggiator and Sequencer
No
No
Yes
Used for Arpeggiator and Sequencer
Yes
Used for Arpeggiator and Sequencer
Yes
Used for Arpeggiator and Sequencer
No
No
No
Yes 1)
Yes 1)
No
No
No
AXON AX 100 MKII V. 2.0 (Español)
Date: Dec 2007
Remarks

Publicidad

Tabla de contenido
loading

Tabla de contenido