Getting Started - Unpacking; Items Supplied; Additional Accessories - Evolution RAGE 4 Instrucciones Originales

www.evolutionpowertools.com
k) Always observe that the lower guard
is covering the blade before placing
saw down on a bench or the floor. An
unprotected, coasting blade will cause the
saw to walk backwards, cutting whatever is in
its path. Be aware of the time it takes for the
blade to stop after switch is released.
(3.4)
WARNING: If any parts are missing, do not
operate your machine until the missing parts
are replaced. Failure to follow this rule could
result in serious personal injury.
(4.1)

GETTING STARTED - UNPACKING

Caution: This packaging contains sharp
objects. Take care when unpacking. Remove
the machine, together with the accessories
supplied from the packaging. Check carefully
to ensure that the machine is in good condition
and account for all the accessories listed in this
manual. Also make sure that all the accessories
are complete. If any parts are found to be
missing, the machine and its accessories should
be returned together in their original packaging
to the retailer. Do not throw the packaging away;
keep it safe throughout the guarantee period.
Dispose of the packaging in an environmentally
responsible manner. Recycle if possible. Do not
let children play with empty plastic bags due to
the risk of suffocation.
(4.2)

ITEMS SUPPLIED

Description
Instruction Manual
Multipurpose Blade (Fitted)
Hex Key 6mm (Vice Adjustment)
Hex Key 5mm (Blade Change)
Hex Key 3mm
(Upper Blade Guard)
Dust Extraction Port
Rubber Vice Jaw Protector
Speed Handle
Spare Motor Brushes
(4.3)

ADDITIONAL ACCESSORIES

In addition to the standard items supplied
with this machine the following accessories
are also available from the Evolution online
shop at www.evolutionpowertools.com or
from your local retailer.
(4.4)
Description
Multipurpose
RAGEBLADE185MULTI
Blade
Diamond
RAGEBLADE185DIAMOND
Blade
11
Quantity
1
1
1
1
1
1
1
1
1 set
Part No