Care And Maintenance - Magic Chef MCSDRY35W Manual Del Usuario

CARE AND MAINTENANCE

UNIT
The dryer should be cleaned regularly, including the control panel, with a soft cloth and nonabrasive household
detergents. The use of harsh detergent or abrasives is not recommended.
DO NOT pour water on the dryer or control panel. Use a soft cloth to dry the surfaces. Failure to maintain the
dryer in a clean condition could lead to deterioration of the surface which could adversely affect the life of the
appliance and possibly result in a hazardous situation.
NOTE: Unplug the power cord before cleaning any part of the dryer.
LINT FILTER ASSEMBLY
The dryer should be cleaned regularly, including the lint filter assembly. Refer to the Lint Filter Assembly chart
when cleaning the filter assembly.
NOTE: Unplug the power cord before cleaning any part of the dryer.
Remove the lint filter by pulling outward using the four (4) grip holes in the filter assembly.
1
NOTE: The lint filter assembly must be installed when operating the dryer. The lint filter assembly must be cleaned
before and after each use.
The lint filter assembly consists of three (3)
parts: exhaust vent shroud, lint filter, and
exhaust filter.
2
Disassemble the lint filter in the following
order: exhaust vent shroud - lint filter -
exhaust filter.
Separate the three (3) parts of the
assembly and clean the individual pieces
3
using a soft brush or a vacuum cleaner.
DO NOT damage the filter assembly.
Reassemble the filter assembly in the
following order: exhaust filter - lint filter
- exhaust vent shroud. Align the entire
4
assembly with the recessed position in the
back of the drum and press firmly until the
entire filter assembly is secured.
Lint Filter Assembly
Exhaust Vent
Shroud
Lint Filter Lint
Exhaust Vent
Shroud
15
Lint Filter Exhaust Filter
Exhaust Filter Dust Cleaner
Lint Filter Exhaust Filter