Operation And Handling; Before First Use; Operation; Cleaning And Maintenance - CASO DESIGN CP 200 Manual Del Usuario

15 Operation and Handling

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Warning
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.

15.1 Before first use

Clean the device, see "cleaning".

15.2 Operation

1. Insert the plug into the socket.
2. Press down the spout.
3. Place a sufficient container under the spout.
4. Halve the citrus fruit and put the half with the cut surface in the middle of the cone.
Press slightly down the half of the fruit.
5. Close the handle. The device will start working and squeezing the fruit evenly. Let the
device work for 15 seconds and open the handle. Repeate the process once you have
desired amount of juice.
6. Pull the power plug once you have finished.
7. Push the spout upward to close it.
► If you want to squeeze an irregularly shaped fruit then let the handle open and press the
half of fruit evenly with your hand on the cone.
► Remove the pulp regularly from the filter insert, so that the juice can flow. Pull the plug
before this.
Warning
► Do not press too hard with the half of fruit on the cone, the motor could be damaged.
Pay attention to your fingers. Risk of injury!
► Pull the plug if the main contact has come into contact with liquid during the operation
and dry the main body immediately with a soft cloth.
► Keep loose clothing, long hair and power cord away from moving parts.
► When the device is operating: Do not touch the filterinsert with your hand, do not touch
the cone.

16 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
Caso Zitruspresse CP 200 / CP 300
Please note
27