Safety Information; Cleaning; Troubleshooting; Security Advices - CASO DESIGN CP 200 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54

16.1 Safety information

Attention
Please observe the safety instructions, before cleaning your device
► Unplug the device when not in use and before any cleaning.
► Never immerse the unit, cord or plug in water or other liquids and do not place in the
dishwasher.
► Do not use iron brush, abradant, kitchen cleaner, or sharp cleaning tool for cleaning.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Clean the device directly after each use.

16.2 Cleaning

Pull the plug of the device. Wipe the main body and the handle with a soft cloth.
Press on the lock of the lid of the cone and detract it. Rinse the lid of the cone with water
and dry it after this. You can clean the cone, filterinsert and juice tray with warm water and
a bit of detergent. Rinse them with water after this thoroughly and dry them.
Reassemble the device.

17 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

17.1 Security advices

Attention
► Repairs of electrical appliances must be carried out by qualified personnel who are
trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable hazards for the user
and damage the machine.
17.2 Troubleshooting
Problem
The device does not
start.
Attention
► If above mentioned steps don't solve the problem, please contact your customer
service.
Caso Zitruspresse CP 200 / CP 300
Solution
 Please check whether the power plug is properly plugged.
 Please check whether the assembly is done according to
assembly methods.
28

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cp 30035403550

Tabla de contenido