Symbols Used; Introduction To The Instruction Manual - Aprimatic WING NK Instrucciones Para La Instalación Mecánica

CONTENTS
1. Introduction to the instruction manual ....................................................................... 7
2. General safety recommendations ............................................................................... 8
3. Envisaged use and Field of application...................................................................... 8
4. Technical specifications............................................................................................... 9
5. Module Components .................................................................................................... 9
6. Obligatory accessories ................................................................................................ 9
7. Installing the Module and Pulley ............................................................................... 10
7.1 Positioning the Module and Pulley.................................................................................... 11
1. INTRODUCTION TO THE INSTRUCTION
MANUAL
Information
These instructions only concern the mechanical
installation of the WING NK MODULE and the idle pulley.
Consult the Instructions enclosed:
• NK BEAM SYSTEM (for preparing the beam);
• WING NK CONTROL SYSTEM (for the connections).
!
Warning
During the assembly and installation of the automation and
the testing of the door, you can be injured if you do not comply
with the safety warnings in this manual. READ the Instruction
Manual carefully before any operations.
THE INSTRUCTIONS MUST BE AVAILABLE WITH THE
SYSTEM SO THEY CAN BE CONSULTED FOR ALL USE
AND MAINTENANCE PURPOSES.
Caution
All the data in the Manual must be considered purely
indicative.
The manufacturer declines any responsibility for possible
inaccuracies in the present manual due to misprints or
typing errors.
The Company reserves the right to modify the product and
make any improvements without giving prior notice.

SYMBOLS USED

The symbols used in this manual have the following
meaning:
!
Warning
This symbol precedes important warnings for the
SAFETY of people and the environment.
Caution
This symbol precedes important warnings for the safety
of the PRODUCT and any connected property.
Information
This symbol precedes useful INFORMATION.
GLOSSARY
The instruction manual uses suitable technical terms for
professionals working in the technical sector for which it is
intended. The following glossary explains the specific meaning
of some terms used in the text:
Automation..................a complete assembly of all the
mechanical, electrical-electronic and
structural components for driving and
controlling the automatic movement
of the specific opening/closing device
(doors, window, gate, bar).
Beam ...........................Support
components of the SLIDING DOOR
automation and wings.
Right-side single wing identifies automations which consist
of just one sliding wing with RIGHT-
SIDE OPENING (looking from the
inside).
Left-side single wing...identifies automations which consist
of just one sliding wing with LEFT-
SIDE OPENING (looking from the
inside).
Passage span..............space through which people can pass
when the door is open.
Overlap........................space along which the wing overlaps
with the wall, due to the fact that
the wing is wider than the passage
span.
7
- -
structure for all the