Rack Installation; Tools Required - Sun Enterprise 220R Manual De Instalación Y Montaje

2
C H A P T E R

Rack Installation

This chapter provides step-by-step instructions for rackmounting the server into a
Sun expansion cabinet or other EIA-compliant rack enclosure.
To rackmount a Sun Enterprise 220R server, complete the following tasks in the
order listed:
"Prepare the Rack Enclosure" on page en-9
"Attach the Mounting Brackets to Each Slide Assembly" on page en-10
"Install the Slide Assemblies Into the Rack Enclosure" on page en-13
"Install the Server Into the Rack Enclosure" on page en-17
The Sun Enterprise 220R Server Rackmounting Overview included with your
documentation set illustrates the rackmounting steps in a convenient, graphical
overview. This chapter provides detailed information about each step.

Tools Required

Phillips #2 screwdriver
Flat-blade screwdriver
Set of Allen wrenches to remove the side panels on some rack enclosures
An adjustable wrench to tighten the nuts on the mounting brackets
en-7