Product Set-Up - D-Link DKVM-222 Guia De Instalacion

PRODUCT
SET-UP
HARDWARE SETUP
Please follow the diagram below to connect the KVM switch to your workstation computers.
Speakers are optional.
For additional information regarding setup and operation please see the User Manual on the
Installation CD included with your KVM switch.
Note:
This KVM Switch will not detect whether a computer is on or off if the "Power On" function is
set in the BIOS. If you switch to a computer that is turned off, nothing will be displayed on the
monitor.
SWITCH OPERATION
Remote Control Switching
Push the remote control button to switch between computers.
The green and orange LEDs indicate the selected PC.
Hot key Switching (for Microsoft Windows
Press the Scroll Lock key two times to switch between PCs, including audio.
Press the Caps Lock key two times to switch between PCs but maintain the audio feed of the
original computer.
DKVM-222
®
PCs)
3