Product Introduction; Front Panel; Rear Panel - D-Link DES-1018MPV2 Guia Del Usuario

DES-1018MPV2 User Guide

Product Introduction

The DES-1018MPV2 is an 18-port PoE unmanaged switch with 2 combo ports. Each PoE port (1 to 16 port)
supports up to 30 watts and complies with IEEE 802.3af/at standard. The switch requires no configuration,
which is suitable for SOHO and SMB users.

Front Panel

H/W DIP switch is used to easily configure the following functions.
Isolation : 1-16 ports of the switch can't communicate with each other, but they can separately communicate
with the uplink ports.
Extend : The data rate of 9-16 port of the switch is limited to 10Mbps, whereas the maximum transmission
distance of the port is increased to 250 meters.
* 1~8 ports support port priority to optimize port cache.
# Item
1 Ports 1 ~16
2 Port 17~18

Rear Panel

Switch GND: This is used to connect the switch to ground.
Power Input: This is used to connect the power cable to the switch.
Figure 1 –DES-1018MPV2 front panel
10/100 Mbps PoE-capable ports for connecting Ethernet devices and PoE-
powered devices.
10/100/1000 Mbps GbE/SFP combo uplink port for connecting to another
switch using an Ethernet cable or installing a compatible SFP transceiver.
Figure 2 –DES-1018MPV2 rear panel
Description
2