Product Setup; Quick Installation - D-Link DUB-H7 Guía De Instalación Rápida

PRODUCT
SETUP

QUICK INSTALLATION

4
Plug the power adapter into the receptor
located on the back of the DUB-H7. Plug the
other end into a wall outlet. The LED on the
DUB-H7 will turn green to indicate that the hub
is receiving power.
Plug the square (Type B) end of the included
USB cable into the back of the DUB-H7.
Plug the Type A connector end of the included
USB cable into an available USB port on your
computer.
Your computer will automatically detect and
install the drivers for the DUB-H7. You may
now connect USB 2.0 or USB 1.1 devices
to any available USB port on the front of the
DUB-H7.
DUB-H7