Sinbo SCO 5033 Manual Del Usuario página 14

3. Make sure dry the removable cooking pot and heating plate before putting the cooking pot into stationary pot. Don't
put anything into stationary pot and heating plate. Please rotate cooking pot lightly into good contact with heating plate.
(see picture 6)
4. Close the lid: Make sure Silicone Gasket is seated properly inside Lid. (see picture 7,8)Hold the lid handle and put
the lid on the cooker, rotate the lid clockwise approximately 30 degrees until the lid is aligned with the "LOCK TO THIS
LOCATION" mark on the pot handle.
5. Install the condensation collector.(see picture 10)
6. Put the pressure valve into position; set it to the'Seal' position and make sure the floater
is in the down position before heating (See picture 9)
7. Connect to the power, the LED Display show "----" and it enter into stand-by state.
8. Choose corresponding button according to food, and the relative indicator will be on.
PRESSURE COOKER SETTING
Cooking Program Functions
The SINBO intelligent cooker uses a large and user-friendly control panel. The convenient built-in program functions
allow you to cook your favorite food with a press of a program function key. SCO 5033 includes 9 programs:
Soup, Congee, Chicken/Meat, Bean/Tendon, Rice, Multigrain, Porridge, Cake, Steam.
1. Soup key
2. Shorter
3. Congee key
4. Normal
5. Chicken/Meat Key
6. Bean/Tendon Key
7. Timer key
8. Steam key
9. Rice key
10. Display
11. Multigrain
12. Longer
13. Porridge key
14. Keep Warm/Cancel
15. Cake key
16. Adjust key
17. Manual key
The general cooking program usage procedure is as follows:
1. Follow steps in Operating Instructions.
2. Connect power cord.
To ensure safety, it is recommended to connect the power cord to the cooker first and then connect the plug to the
power outlet.
3. Select a cooking program function key.
OPERATING INSTRUCTIONS
1
2
3
4
5
6
7
8
- 13 -
Exhausting
9
10
11
12
13
14
15
16
17