Problem Solving - Eureka 160 Guia Del Propietario

ENGLISH

PROBLEM SOLVING

NOTE: Turn off the switch and unplug the electrical cord before servicing.
Problem
Motor will not start.
No suction at end
of nozzle.
Reduced suction.
General questions.
12
Cause
Electric plug
Power switch not turned "ON"
Full dust cup
Nozzle clogged
Full dust cup
Nozzle clogged
Assembly or related attachments
Solution
• Push plug securely into outlet.
• Try another outlet.
• Check circuit breaker.
• Make sure power switch is "ON."
• Empty dust cup.
• Remove any clogs from nozzle that restrict airflow,
then try again.
• Empty dust cup.
• Remove any clogs from nozzle that restrict airflow,
then try again.
• Call 1-800-282-2886 between 8:00 a.m. to 7:30 p.m.
CST Monday through Friday and 10:00 a.m. to 6:30 p.m.
CST on Saturday. Know the model number and serial
number when you call.