Replacing The Toner Cartridges - Xerox WorkCentre 7232 Guía De Uso Rápido

Replacing the Toner Cartridges

This procedure shows you how to remove a used toner cartridge
and replace it with a new toner cartridge. The toner cartidges are
replaced with the machine turned ON. The cartridges are loaded
into a cartridge rotor that rotates to the required position for the
toner cartridge to be replaced. The machine will tell you when
you will need to order a new cartridge and when to install it.
Follow the disposal instructions for the old cartridge when you
receive with the new cartridge.
1.
Press the Machine Status button on the control panel and
select the Supplies tab on the Machine Information screen.
Note: The machine automatically displays the Consumables
Status window when a consumable requires immediate
replacement.
2.
Select the toner cartridges marked with a cross, indicating a
replacement is required.
Note: If multiple cartridges are marked with a cross, the toner
cartridges are replaced in the order KYMC.
3.
Select Replace Cartridge.
Note: The toner cartridge replacement procedure is repeated
for each toner cartridge being replaced.
4.
Wait until the rotor turns to the correct position and the prompt
is shown on the screen. Then, confirm the screen indicates
the correct toner.
WorkCentre 7232/7242 Quick Use Guide
WorkCentre 7232/7242