Ink Ribbon Replacement - Sharp COMPET CS-2850A Manual De Manejo

1. Remove the paper roll from the calculator. (Tear the paper and remove it from the
print mechanism by using
2. Set the power switch to "
Make sure that the print wheel has stopped.
3. Remove the printer cover by sliding it towards the back of the calculator. (Fig. 1)
• Roll the display downwards till it stops.
4. Remove the used ribbon.
5. Install the new ribbon.
6. With the black side of the ribbon facing upwards, place one of the reels on the reel
shaft on the left. Make sure that the reel is securely in place.
7. Thread the ribbon around the outside of the metal guides. (Fig. 2)
8. Insert the right reel securely.
9. Take up any slack by manually turning one of the reels.
10. Replace the printer cover.
11. Replace the paper roll.
Printer cover
Ink ribbon

INK RIBBON REPLACEMENT

.)
".
Fig. 1
Correct
method
Correct
Ink ribbon
Reel shaft
Reel
Reel detection lever
10
Ink ribbon
Reel shaft
Reel
Fig. 2
Wrong
method
Wrong