Paper Roll Replacement; Ink Ribbon Replacement - Sharp EL-2631L Manual De Instrucciones

PAPER ROLL REPLACEMENT

Never insert paper roll if torn. Doing so will
cause paper to jam.
Always cut leading edge with scissors first.
1) Insert the leading edge of the paper roll into the
opening. (Fig. 1)
2) Turn the power on and feed the paper by
pressing . (Fig. 2)
3) Insert the paper roll to the paper holder. (Fig. 3)
Fig. 2
All manuals and user guides at all-guides.com
Fig. 1
Fig. 3
DO NOT PULL PAPER BACKWARDS AS THIS
M AY C A U S E D A M A G E T O P R I N T I N G
MECHANISM.

INK RIBBON REPLACEMENT

1. Remove the paper roll from the calculator.
(Tear the paper and remove it from the print
mechanism by using
2. Turn the power off before replacing ribbon.
3. Remove the printer cover by sliding it towards
the back of the calculator. (Fig. 4)
4. Remove the old ribbon by pulling it up.
5. Insert the new ribbon.
6. With the black side of the ribbon facing upwards,
place one of the reels on the reel shaft on the
right. (Fig. 5) Make sure that the reel is securely
in place.
7. Thread the ribbon around the outside of the
metal guides. (Fig. 6)
8. Take up any slack by manually turning one of
the reels.
9. Replace the printer cover.
10. Replace the paper roll.
4
.)