Scope Of Delivery; Device Description; Intended Use; Air Purification - Soehnle AIRFRESH CLEAN 400 Instrucciones De Manejo

electric shock when the unit is reconnected
to the wall outlet. Wipe off moisture with a
dry cloth. Do not touch the plug or device
with wet hands.
• The filter has to be changed, do not unscrew
the device beyond that. In particular, replace­
ment of the UV­C lamp by the user is not
permitted.
Caution!
• If the power outlet used to operate the Air­
fresh Clean 400 is not properly connected, the
appliance's plug will become hot. Make sure
that you are using a properly connected pow­
er outlet for the device.
• Do not place any objects on the
Airfresh Clean 400 and do not
sit or stand on it.
• Only use the original Soehnle filter, which is
specially designed for this Airfresh Clean 400.
• Do not use the Airfresh Clean 400 after using
incense as an insect repellent or in places
where oil residues, chemical vapours or incense
sticks are present.
• Do not use the Airfresh Clean 400 near heaters,
open fireplaces or gas­powered devices.

2. Scope of delivery

1x Soehnle Airfresh Clean 400
1x Soehnle HEPA 13 combination filter
for Airfresh Clean 400
1x instruction manual

3. Device description

A : control console
B : air outlet
C : PM 2.5 Sensor (fine dust sensor)
with protective flap
D : Housing and air inlet
E : UV­C lamp
F : Soehnle HEPA 13 combination filter (68129)
G : removable case back
H : screw cap

4. Intended Use

The Airfresh Clean 400 is used exclusively for
cleaning the room air.

5. Air purification

With the Soehnle HEPA 13 combi filter you can
remove a large number of unwanted particles
and odours from the room air. Microorganisms
and viruses are destroyed by switching on the
UV­C light.
Pre-filter:
Captures coarse dust.
Soehnle HEPA 13 combination filter:
A HEPA 13 filter detects dust, smoke, pollen and
other allergens. An activated carbon filter filters
odours from the air.
UV-C light:
Destroys microorganisms such as germs, viruses,
bacteria, fungal spores and mould toxins
(mycotoxins).

6. Before first use

1. Place the unit upright on a firm, level surface.
Maintain a minimum distance of half a meter
from the unit to each wall.
2. To ensure optimum performance of the
unit, ensure that the air inlets and outlets are
not blocked.
(Fig. 1.1)
3. Check the power cord to make sure it is free
of damage.
4. Turn and open the underside of the
unit as described in Chapter 8. Remove and
unpack the Soehnle HEPA 13 combi­filter.
GB
11