Product Description - Lightair IONFLOW 50F Manual De Montaje Y Guía Del Usuario

ENGLISH
Congratulations on your choice of an air puri-
fier from LightAir!
Your new LightAir IonFlow 50 air purifier is extremely
effective. The LightAir IonFlow technology used in
the air purifier is unique and patented. Instead
of using a filter system to process the air, this air purifier
attracts harmful particles in the indoor environment, which
then attach themselves to the collector. Traditional air puri-
fiers only filter the air that passes through the filter instead
of purifying all the air in the room where they are placed.
Tests conducted by SP, the Technical Research Institute of
Sweden, were carried out in a closed room with a constant
supply of smoke particles. The results showed that the Ligh-
tAir IonFlow 50 air purifier eliminates 99.94% of all particles
after only 5 hours. The air purifier retains its effectiveness
over time, which means that you will be able to breathe air
that is free from viruses, bacteria, pollen, spores, allergens,
dust etc, on an ongoing basis.
LightAir designs, manufactures and sells products for
optimal indoor air purification. Our entire manufacturing pro-
cess takes place under strict control in order to ensure the
highest quality. So that you get the most out of your LightAir
product and in order to enjoy optimal installation, use and
maintenance of your air purifier,
we recommend that you read this manual thoroughly. Follow
these instructions carefully, and you will be
breathing cleaner and healthier air for many years
to come.
IMPORTANT: Keep this manual for future reference.
1. For the product function and your safety.
• The air purifier should only be installed and cleaned by
adults
• The air purifier should be installed according to the instruc-
tions, at the correct distance from the wall and placed on
a secure and stable surface. If not correctly placed, the air
purifier can fall and cause injury to people or damage to its
surroundings.
S E E T O P P I C T U R E O N P A G E 3 4
Place the air purifier at least 3 feet/1 meter away from all
walls, furniture and all electronic equipment (TV, computer,
etc). If possible place the air purifier 5 feet/1.5 m or more
away from all electronic equipment. And at least 1½ feet/0.5
m away from all other items in the room. If these recommen-
dations are not followed, nearby walls and/or furniture can
become somewhat dirty.
NB. LightAir cannot be held responsible for any damage
caused as a result of failure to follow the recommendations.
• The air purifier is an electrical appliance (12V) and should
be treated as such. Be particularly careful to avoid accidents
during installation, use and maintenance.
The air purifier is certified according to international norms
and standards.
• Never use an air purifier with a damaged power cable,
transformer or damaged electronics.
• Do not place the air purifier or cable near a heat source
• Do not use the air purifier outdoors
• Do not use the air purifier in damp rooms
• Do not use the air purifier in conjunction with coloured or
oil-based candles, as they secrete a great deal of extremely
dangerous soot which can become attached to walls and
4
furniture.
• The air purifier is radio signal distress tested according to
international standards. Should the air purifier cause unwan-
ted audio distress, simply move it to a different position.
• You may experience a small electric shock when touching
the collector. This is not dangerous! The voltage of the air
purifier is equivalent to around 8% of a 1.5v battery. If you
find this mild shock unpleasant, unplug the appliance before
handling it.
2. Assembly of protective guard
S E E P I C T U R E S O N P A G E 3 4
If you are worried that you or those around you may find
the mild, harmless shock unpleasant, you can use the
protective guard provided. Please note that this is not
essential from a safety perspective.
Assemble the protective guard in the following order:
a) Lay out all the pieces in front of you
b) attach the first four slats to the tracks
on the upper, wider ring.
c) Then attach the slats to the lower,
narrower ring. Press them into place to
ensure that they are properly fastened.
d) Then attach the remaining slats in the
same way.
e) Ensure that all the slats are firmly at-
tached to the lower ring.
f) Carefully place the finished touch guard
over the collector.
g) Finished!

3. Product description

IonFlow 50F & 50F Style:
1 ion generator (above= 3 corona needles, below=outlet and
metal hook)
1 collector
1 acrylic stand with switch
1 transformer
8 decorative lights (4 in the appliance & 4 extra)
1 touch guard (32 slats and 2 assembly rings)
IonFlow 50C:
1 ion generator (above=outlet and metal hook, below=3
corona needles)
1 collector
1 extension lead
1 transformer
1 pressure relief device
1 kit for ceiling mounting: wall plug, ceiling hook, pressure
relief hook
4A. Assembly and installation of
IonFlow 50F & 50F Style
S E E P I C T U R E S O N P A G E 3 2
Assemble the air purifier in the following order:
1: Hold the metal hook on the ion generator (plastic tube).
Then carefully lift the collector (aluminium cylinder) from
underneath (where the outlet is) up and over the metal hook
2: Then let the collector slide back down and rest on the
metal hook. NB. This connection is vital in order for the air
purifier to function
3: Carefully place the ion generator and collector onto the
acrylic stand in order to connect to the electricity. Ensure that
the ion generator and collector are pressed down firmly and
securely into the acrylic stand
4: Finally, plug the transformer cable into the switch plug in
the transformer plug
The indication light should light up. Congratulations!
From now on, you are breathing cleaner air.
5: To switch the IonFlow 50F & 50F Style on and off:
• Air purifier ON (upper indication light on) & decorative light
OFF
• Air purifier ON (upper indication light on) & decorative light
ON
• Air purifier OFF (upper indication light off) & decorative
light OFF
6: The decorative lights can be changed easily.
4B. Assembly and installation of 50C
S E E P I C T U R E S O N P A G E 3 3
Assemble the air purifier in the following order:
For ceiling installation: Drill an 8mm hole in the ceiling to
attach the wall plug and ceiling hook. Insert the plug into the
hole and screw in the ceiling hook.
For suspended ceilings: Consult an electrician for the most
appropriate solution
NB. Ensure that the distance from the wall to the air purifier
is at least 3 feet / 1 metre
A-D: Thread the cable through the loops of the pressure
relief device.
E-F: Attach the pressure relief device to the top of the ion
generator (at the outlet on the plastic tube) and ensure that it
snaps into the holes
G: Connect the plug to socket on the ion generator
H: Attach the cable to the pressure relief hook. The air puri-
fier should hang down at least 2 feet / 60 cm from the ceiling
I: Hang the pressure relief hook from the ceiling hook
J-K: Hold the metal hook on the ion generator. Then care-
fully lift the collector (aluminium cylinder) from underneath
(where the corona needles are) up and over the metal hook
L: Then let the collector slide back down and rest on the
metal hook. NB. This connection is vital in order for the air
purifier to function.
• Finally, plug in the transformer plug at the wall socket. If
an extension lead is required, attach this to the transformer
cable.
The indication light should light up. Congratulations!
From now on, you are breathing cleaner air.
5. Cleaning and maintenance
• Always unplug the transformer plug before cleaning the air
purifier.
• Do NOT wash the collector in the dishwasher.
• Do not use cleaning products that contain alcohol solutions,
ammonia or alkaline substances, as these products may
damage the air purifier.
• The collector should be cleaned around once a week or as
and when required. The collector may require more frequent
cleaning if used in highly contaminated environments.
Cleaning the collector:
IonFlow 50F & 50F Style: Remove the collector by lifting up
the ion generator with the collector attached. Then hold in
the metal hook and pull the collector downwards (pictures
1-3 on page 32, in reverse). NB. The ion generator may be
ENGLISH
damaged if you pull it upwards!
IonFlow 50C: Hold in the metal hook on the ion generator
and move the collector down (pictures J-L on page 33, in
reverse)
1. Clean the collector with washing-up liquid, warm water
and a soft sponge/dish brush
2. Dry the collector with a dishtowel
3. Put the collector back on the ion generator according to
the earlier instructions.
If you have followed all the above instructions but the col-
lector is not clean, try the following:
1. Spray cleaning fluid onto the collector and let it work for
5 minutes
2. Using a damp sponge, rub any remaining spots until they
disappear
3. Wipe the collector using a clean, damp sponge
4. Dry the collector with a towel and place it back on the ion
generator according to the earlier instructions.
5. Repeat the above procedure if necessary
Cleaning the ion generator, corona needles and acrylic
stand:
• Once every four months you may need to carefully clean
the fragile corona needles. Use a small brush (e.g. a
toothbrush) and carefully brush away the thin layer of white
lime scale and dirt which may have become attached to the
needles. Do not use pressure or water when you clean the
needles.
• Clean the ion generator and the acrylic stand with cleaning
spray and a damp cloth or sponge. Wipe clean and rub away
any remaining dirt. Dry with a towel. Do not allow the top and
bottom to come into contact with water and be careful with
the corona needles on the ion generator.