Whittier Wood 589Wb Instrucciones Para Armar página 6

Eb
EDGE BANDING
Db
ZE
C
FIG. 2
2) Glue two Dowels (T) for Sleepers (C) into Right Side (Bb). Glue the two Sleepers (C) onto the dowels
in the Right Side (Bb). The notches in the Sleepers should face toward the bottom of the unit and
the outer edges should be fl ush with the edges of the Sides. Insert #8 x 1¾" Pan Head Screws (ZE)
into the holes in the notches and fasten to the Right Side. See FIGURE 2.
Glue two Dowels (T) for Center Shelf (Db) into the Right Side (Bb). Attach the Center Shelf (Db)
to the Right Side (Bb) using the dowels and two Cam Connectors (L) and Cam Housings (M). The
moulding must face the front. See FIGURE 2.
Attach the Crown (Eb) to the Right Side (Bb). Insert a #8 x 1
the Right Side into the hole in the end of the Crown. The edge banding should face down.
3) Glue two Dowels (T) for Sleepers (C) and two for Center Shelf (Db) into the Left Side (Ab). Attach
the Left Side (Ab) to the Sleepers (C), Center Shelf (Db), and Crown (Eb). The sleepers use dowels
and #8 x 1¾" Pan Head Screws (ZE); the center shelf uses dowels and Cam Housings (M); and the
crown uses a #8 x 1
Attach the Magnetic Catch (X) to the bottom edge of the Crown centered side to side and fl ush with
the front edge. Use the pan head screws contained in the package.
Page 6 — 589Wb — Rev. 9/07
T
M
T
T
ZE
5 / " Black Screw (V). See FIGURE 3.
8
V
Ab
Bb
V
T
FIG. 3
5
/ " Black Screw (V) through the hole in
8
Eb
X
T
Db
C
M
T
ZE
Bb