Dimplex DCF44 Manual Del Propietário página 11

Operation
Figure 3 - Remote Control Functions
A. Room Temperature
B. Set Temperature
C. Dimmer
D. Flame Speed Control
E. Sleep Timer
F. Flame & Heat On/Off
G. Temperature Down
H. Temperature Up
I. Dimmer Down
J. Dimmer Up
K. Flame Speed Down
L. Flame Speed Up
M. Sleep Timer Down
N. Sleep Timer Up
To set the sleep timer press
the N button.
Set the timer from 30 minutes
through 8 hours. The fireplace
will automatically turn off when
the sleep timer reaches zero
(0) minutes.
The Sleep Timer can be can-
celled at any time by pressing
the M button repeatedly until
the sleep timer displays noth-
ing.
F. Flame & Heat On/Off Button
Press the F button
the Flame/Heat function on.
G
I
K
M
!
to turn
B
D
F
When B is higher then A the
heat will come on. To turn the
heat off, lower the B so that
it's setting is lower then the A.
The default temperature set-
ting is 72°F (22°C).
NOTE: When using the re-
mote control the heater runs
on a thermostat. Press the H
or G buttons to adjust the set
temperature. Once the desired
set temperature is reached the
heater will turn off. The heater
will cycle on and off to main-
tain the desired set tempera-
ture.
A
H
C
J
L
N
E
11