Installation Steps - VESTEL AC22 Serie Guia De Instalacion

Required Tools for Installation
•(1x) Drilling Machine
•(1x) Drill bit Ø8mm
•(1x) Hammer (for Screw Anchor)
•(1x) Torx T25 ( Security ) Screwdriver
•(1x) Torx T20 Screwdriver
•(1x) Phillips PH2/PH3 Screwdriver
•(1x) Flat(Slot type) Screwdriver
•(1x) Spirit Level (Water level)
•(1x) Wire Cutters
•(1x) Mains Tester Screwdriver

INSTALLATION STEPS

1- Remove the bottom cover and wall bracket as shown in Figure 1.
M5*12 SCREW-T20 Tightening Torque: 4 Nm ± 0,5 Nm
Figure 1
English - 2 -