Setting Wi-Fi Kit Back To Access Point Mode - Waeco ASC G Instrucciones De Uso

ASC G Wi-Fi kit
12. Select the Client mode: Wi-Fi kit connects to an existing network
option.
13. Insert credentials (SSID and password) of the network you want to
connect to.
14. Click on the Confirm button.
✔ The ASC is rebooting and the "ASC_UNIT" network is being disabled.
✔ The ASC connects to the selected network.
15. Disable the "airplane mode" on your device.
16. Set back the Wi-Fi network connection to the original one on your
device.
✔ You can now connect your device to the ASC (see chapter "Connect-
ing to the ASC" on page 8).
NOTE
If you want to set the Wi-Fi kit back in Access Point Mode see chapter
"Setting Wi-Fi kit back to Access Point Mode" on page 7.
5.3

Setting Wi-Fi kit back to Access Point Mode

You can do this either at the ASC's control panel (chapter "Setting
Wi-Fi kit to Access Point Mode on the ASC" on page 7) or more comfort-
able via a web browser on a connected device (chapter "Setting Wi-Fi kit
to Access Point Mode via web browser" on page 8).
5.3.1 Setting Wi-Fi kit to Access Point Mode on the ASC
1. In the basic menu, use the cursor keys  or  to select
Other selections:
2. Press ENTER to confirm.
3. Use the cursor key  to select Wi-Fi kit.
4. Press ENTER to confirm.
5. Use the cursor key  to select Wi-Fi Setup.
6. Press ENTER to confirm.
7. Use the cursor key  to select Access Point.
8. Enter a new SSID for the ASC's network:
9. Press ENTER to confirm.
10. Enter a new password and remember it.
✔ You can now connect your device to the ASC (see chapter "Connect-
ing to the ASC" on page 8).
EN
Setting up the Wi-Fi kit
7