Operating Your New Appliance - Sage the Smart Grill Pro Guía Rápida

ASSEMBLING YOUR
NEW APPLIANCE
PREPARING THE GRILL FOR USE
1.
Remove and safely discard any packing
material and promotional labels from
the grill.
2.
Wipe the cooking plates and drip tray with
a soft damp sponge. Dry thoroughly.
3.
Ensure the drip tray is correctly inserted into
the grill.
4.
Ensure the cooking plates are correctly inserted
and securely locked into position.
5.
Place the grill on a flat, dry surface.
Ensure there is a minimum distance of 10cm
of space on both sides of the appliance.
6.
Remove probe from packaging and insert jack
into the socket on the front face of the Probe
Storage area located on the right hand side
of the grill. When not in use, wrap probe cord
around Probe Storage.
7.
Unwind the power cord completely and insert
the power plug into a grounded wall outlet.
8.
The grill alert will sound and the LCD screen
will display OFF.
9.
The grill is now ready for the preheating cycle.
The grill features 2 x PLATE RELEASE.
These allow you to independently remove the top
and bottom cooking plates for easy cleaning,
or to interchange plate positions.
USING THE PLATE RELEASE
• To use the PLATE RELEASE:
− Always ensure the grill is completely cool.
Use the handle to open the top plate
to a 90 degree position.
− Use the 'Plate Release' on the front,
right side of the top plate to remove the
top cooking plate, and the 'Plate Release'
on the left side of the control panel to remove
the bottom cooking plate. Once released,
gently slide the plates off the grill.
• If the cooking plates are incorrectly inserted,
the LCD screen will display Er1. Use the 2 x
PLATE RELEASE to remove the plates then
re-insert so they securely lock into position.
Always ensure the grill is completely cool before
releasing and removing the cooking plates.
• When the grill is turned on and heating for the
first time, it may emit a fine smoke haze. This is
due to the protective substances on the heating
elements. It is safe and not detrimental to the
performance of the grill.
OPERATING YOUR
NEW APPLIANCE
PREHEATING THE GRILL
1.
Ensure the top plate of the grill is in the closed
position, with the Height Control Clip in the
OPEN position. This will ensure faster,
more efficient preheating
2.
Turn the PLATE TEMP dial to adjust the
temperature in 5°C increments. Rotate the dial
to SEAR (210°C–230 °C) for fast preheating,
PANINI (sandwich) (180°C– 205°C), LOW
(160°C –175°C) or select an alternative
temperature.
3.
The grill will start to heat and the LCD screen
will illuminate orange. Selected temperature
that corresponds to PLATE TEMP will flash.
4.
Once the grill has preheated to the selected
temperature, one alert will sound and the
selected PLATE TEMP will stop flashing.
NOTE
Always allow the grill to completely preheat
to the selected temperature before cooking.
The temperature corresponding to PLATE
TEMP on the LCD may flash during the
cooking process. This is normal, indicating
that the correct temperature is being
maintained.
ADJUSTABLE HEIGHT CONTROL
This feature reduces the weight of the top plate
on delicate foods like fish and accommodates
varying thicknesses of food like artisan breads.
Located on the right side of the top plate, the
clip fixes the top plate to a range of positions
above the bottom plate. To set the adjustable
height control, use the handle to lift the top plate
and simultaneously move the adjustable height
control clip to the desired height. Then slowly
lower the top plate until it rests on the adjustable
height control clip.
ADJUSTABLE TILT CONTROL
The angle of the cooking plates can be adjusted
by turning the PLATE TILT dial. The PLATE TILT
dial is located on the lower back, right side of the
grill. The unique indent between the two cooking
plates channels juices from both plates into the
same drip tray while cooking.
EN
5