Panasonic AW-PH360L Manual De Operación página 46

Limiters
O For the controller AW-RP400
1. To set the upper limit position of the
travel range:
Using the controller, tilt the camera to
the position which is to serve as the
upper limit.
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 15 .
The setting is completed as soon as the
lamp of the PRESET MEMORY button
45 comes on.
To release the setting:
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 15 .
The setting is released when the lamp of
the PRESET MEMORY button 50
comes on.
2. To set the lower limit position of the
travel range:
Using the controller, tilt the camera to
the position which is to serve as the
lower limit.
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 20 .
The setting is completed as soon as the
lamp of the PRESET MEMORY button
45 comes on.
To release the setting:
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 20 .
The setting is released when the lamp of
the PRESET MEMORY button 50
comes on.
3. To set the left-most limit position of
the travel range:
Using the controller, tilt the camera to
the position which is to serve as the left-
most limit.
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 5
The setting is completed as soon as the
lamp of the PRESET MEMORY button
45 comes on.
To release the setting:
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 5
The setting is released when the lamp of
the PRESET MEMORY button 50
comes on.
4. To set the right-most limit position of
the travel range:
Using the controller, tilt the camera to
the position which is to serve as the
right-most limit.
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 10
The setting is completed as soon as the
lamp of the PRESET MEMORY button
45 comes on.
To release the setting:
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 10
The setting is released when the lamp of
the PRESET MEMORY button 50
comes on.
- 45 (E) -
.
.
.
.