Operating Procedures - B&G electronics PW-100 V5 Manual De Instalación Y Operación

Red
Black
PW-100 PW-100
V5 V5

OPERATING PROCEDURES

All of the equipment's functions are managed through the 3 toggle switches of the
switchbox (see fi gure below).
MIC
m.WAIL
Volume
control
HORN
ACTIVATING FUNCTIONS
Intercom*
ON: pull up &
m.WAIL siren inter
release
OFF: pull up &
HORN aux/s ptt
release
INTER enables the hearing of exterior
sounds through the internal speaker.
If during 5 minutes the equipment does
not detect any activity, INTER function
turns off (Automatic Shut Down, ASD).
Public Address "PA"*
m.WAIL siren inter
ON: pull down &
hold
OFF: release
HORN aux/s ptt
PTT allows the driver to communicate
to the exterior through the switchbox
microphone.
For a private communication (lower exterior
volume) pull down PTT while in INTER
mode. For a more public communication
(louder exterior volume), pull down PTT
while in SIREN, AUX SIREN or stand-by (with
no other active function) mode.
Siren - WAIL tone
m.WAIL siren inter ON: pull up &
hold
OFF: release
HORN aux/s ptt
Activates the reproduction of the WAIL
siren tone.
* If acoustic feedback occurs while INTER or PTT are on, AFC (Automatic Feedback Control) will trigger to prevent
feedback. AFC is further explained ahead in this manual.
SIREN INTER
AUX/S PTT
Siren - SIREN tone
ON: pull up &
m.WAIL siren inter
release
OFF: pull up &
HORN aux/s ptt
release
Activates the reproduction of the tone
selected for SIREN.
Auxiliary
ON: pull down &
m.WAIL siren inter
release
OFF: pull down
HORN aux/s ptt
& release
AUX function either turns on an auxiliary
siren tone AUX SIREN or activates an
auxiliary load AUX LOAD, depending on the
subfunction assigned to it.
Siren - HORN tone
m.WAIL siren inter ON: pull down &
hold
OFF: release
HORN aux/s ptt
Activates the reproduction of the HORN
tone.
5 5