Metra 99-5833B Instrucciones De Instalación página 7

ISO DDIN radio provision
1. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
2. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for proper
operation.
3. Mount the radio/bracket assembly
into the dash using the (2) supplied
#8 x 3/8" Phillips screws.
4. Reassemble the dash in reverse
order of disassembly using the
new radio trim panel.
Kit Assembly
(Figure A)
99-5833B
7