General Information - Liberty Pumps LowPro41LP Manual De Instalación

1. General Information

Before installation, read the following instructions carefully.
performance. Closely following these instructions will eliminate potential operating problems, assuring years of trouble-free service.
•
Risk of electric shock – The pump power cord is equipped with a grounding conductor and grounding-type 3-prong plug. To
reduce the risk of electric shock, be certain that it is connected only to a 115V properly grounded grounding-type receptacle. All
electrical circuitry should be installed in accordance with the National Electric Code (NEC) and all applicable local codes or
These pumps are not to be installed in locations classified as hazardous in accordance with the National
ordinances.
Electric Code, ANSI/NFPA 70.
•
Installation must be in accordance with the National Electric Code and all applicable local codes.
•
Installation and servicing is to be conducted by qualified personnel.
•
Do not use these pumps in water over 140° F.
•
The Uniform Plumbing Code (UPC) states that sewage systems shall have an audio and visual alarm that signals a malfunction of
the system, to reduce the potential for property damage.
Dimensional Data
©Copyright 2009 Liberty Pumps Inc. All rights reserved
Each Liberty pump is individually factory tested to insure proper
2