Axxess AX-BASSKNOB Instrucciones De Instalación

INSTALLATION INSTRUCTIONS
Axxess bassknob for AX-DSP
This is an add-on accessory for the AX-DSP. If you are using
the AX-DSP to install an aftermarket subwoofer and would
like quick independent control of the subwoofer gain.
Installation is extremely easy.
• Connect the Orange wire on the AX-BASSKNOB to the
Orange wire on the AX-DSP 20-pin harness or the
vehicles specific harness that was purchased.
• Connect the Black wire on the AX-BASSKNOB to a
chassis ground in the vehicle.
We provide two mounting options for the AX-BASSKNOB,
there is a detachable mount so the gain control knob can be
mounted under a dash or in a pocket, also provided, a washer
and locking nut so the gain control can be flush mounted .
1-800-221-0932
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
subwoofer control
AX-BASSKNOB
www.axxessinterfaces.com
REV. 5/9/17