Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS
Axxess bassknob for AXDSP-X
This is an add-on accessory for the AXDSP-X. If you are
using the AXDSP-X to install an aftermarket subwoofer and
would like quick independent control of the subwoofer gain.
Installation is extremely easy.
• Connect the Orange wire on the AXBK-1 to the
Orange wire on the AXDSP-X 20-pin harness or the
vehicles specific harness that was purchased.
• Connect the Black wire on the AXBK-1 to a chassis
ground in the vehicle.
We provide two mounting options for the AXBK-1, there is a
detachable mount so the gain control knob can be mounted
under a dash or in a pocket, also provided, a washer and
locking nut so the gain control can be flush mounted .
1-800-221-0932
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
subwoofer control
AXBK-1
www.axxessinterfaces.com
REV. 2/4/20

Publicidad

loading

Resumen de contenidos para Axxess AXBK-1

  • Página 1 Orange wire on the AXDSP-X 20-pin harness or the vehicles specific harness that was purchased. • Connect the Black wire on the AXBK-1 to a chassis ground in the vehicle. We provide two mounting options for the AXBK-1, there is a...
  • Página 2 AXDSP-X de 20-pin o al arnés específico del vehículo que se compró. • Conecte el cable negro en el AXBK-1 a un tierra del chasís en el vehículo. Ofrecemos dos opciones de montaje para el AXBK-1, hay un montaje desmontable para que la perilla de control de ganan- cia se puede montar bajo un tablero o en un bolsillo, también...