Kohler K-3422 Guia De Instalacion página 6

Tank Bolt
Washer
Gasket
Brass Nut
3. Install the Tank
IMPORTANT! Risk of product damage. Overtightening the tank
bolts may cause breakage or chipping of the vitreous china.
Remove the nuts and washers from the preassembled tank bolts
on the bottom of the tank.
Set the nuts and washers aside.
Position the tank on the bowl by centering the gasket on the bowl
inlet.
Assemble the washers and nuts to the tank bolts.
Tighten the nuts until snug.
Verify that the tank is level both left to right and front to back.
Make sure the nuts are tight enough to achieve a watertight seal.
1004604-2-G
Tank Bolt
Tank
Tank
Gasket
Bowl Inlet
Viewing The
Assembly From
Under The Tank
6
Tank
Kohler Co.