Setting Menu; Clock Set/Adjust; Display Mode (Yy-Mm-Dd); Year Date Time 01/01 Mon - Samsung SVR-24JP Instrucciones De Uso E Instalación

SETTING CURRENT TIME
– HOW TO SET THE CURRENT TIME
9
❷!
Press the SHIFT button.
•
CLOCK SET/ADJUST starts.
SHIFT
V-LOCK

CLOCK SET/ADJUST

1 SUMMER TIME SET (USE)
2

DISPLAY MODE (YY-MM-DD)

❿
3 CLOCK SET/ADJUST
YEAR DATE TIME
2001 01/01 MON 12:00
$
❿
( ❷ /– +)

END:MENU

11
Set the hour and minute
using the TRACKING/SET
buttons.
•
When pressing TRACKING/SET
button, "13" is set.
•
❿ ❿ !button to place
Press the SHIFT
the sign under the minute.
$
•
The minute works in the same way.
TRACKING/SET
CLOCK SET/ADJUST
1 SUMMER TIME SET (USE)
2 DISPLAY MODE (YY-MM-DD)
❿
3 CLOCK SET/ADJUST
YEAR DATE TIME
2002 12/25 WED 13:30
$
( ❿ /– +) END:MENU
❷
15
10
Set the year, month and
day using the TRACKING/
SET buttons.
(In case DISPLAY MODE is YY-MM-DD)
•
When pressing TRACKING/SET
button once, "2002" is set.
•
❿ ❿ !button after
Press the SHIFT
setting the year, then sign will
$
place under the month.
•
The month works in the same way.
TRACKING/SET
CLOCK SET/ADJUST
1 SUMMER TIME SET (USE)
2 DISPLAY MODE (YY-MM-DD)
❿
3 CLOCK SET/ADJUST
YEAR DATE TIME
2002 12/25 WED 12:00
$
❿
( ❷ /– +) END:MENU
12
Press the MENU button
twice.
•
Check the year, month, day and
hour again and press the MENU
button twice.
2002-12-25 WED
13: 30:00 L 3 H
REFERENCE
Time display
• There is no display of a.m or p.m.
• 1:00 p.m is displayed as 13:00, 11:00 p.m as
23:00 and 12:00 p.m. as 00:00 respectively.

SETTING MENU

– SETTING DISPLAY AND ALARM REC
1

DISPLAY MODE SETUP

DISPLAY MODE SETUP
❿
1 DATE DISPLAY ------------------(ON)
2 TIME DISPLAY-------------------(ON)
3 POSITION -------------(R-BOTTOM)
❿
( ❷ ) END:MENU
(example)
* To turn the time on or off
❿
1. Place the " " Sign in the
"TIME DISPLAY" position using the
SHIFT ❷ ❷ button.
2. Press the SHIFT ❿ ❿ !button to toggle
the time ON and OFF.
(The DATE and POSITION
work in the same way.)
2
ALARM REC SETUP
* MODE: Select ALARM REC speed.
ALARM REC SETUP/RECALL
❿
1 MODE----------------------------- (L3H)
2 DURATION --------------------(AUTO)
3 BUZZER ---------------------------(ON)
• DURATION: Set ALARM REC time.
4 ALARM RECALL
❿
( ❷ /– +) END:MENU
* To set ALARM REC in L3H
mode for 5 minutes.
❿
1. Place the " " sign in the
"DURATION" position using
the SHIFT ❷ ! ❷ button.
❿ ❿
2. With each press of the SHIFT
button the display changes "SEL
3 MIN".
• BUZZER: Selects if the beeper sound is on or off
3. Select "SEL 5 MIN" using the
SET "+" button.
• ALARM RECALL : Check Alarm recording.
4. Press the MENU button.
• DATE: Select date display ON/OFF
ON OFF
2002-12-25 WED 12:45:30 L3H
12:45:30 L3H
• TIME: Select time display ON/OFF
ON OFF
2002-12-25 WED 2002-12-25 WED
12:45:30 L3H
• POSITION: Select position of date & time on
the screen.
2002-12-25 WED 2002-12-25 WED
9:16:14 L3H 9:16:14 L3H
L-UPPER R-UPPER
L-BOTTOM R-BOTTOM
2002-12-25 WED 2002-12-25 WED
9:16:14 L3H 9:16:14 L3H
Select L3H, L12H, L24H. (L8H is not
available).
OFF: This unit does not Alarm REC
whether Alarm signal comes in or not.
AUTO
SEL 3MIN
TAPE END
• To set ALARM REC time.
Adjust the time from SEL 20SEC to
5 MIN using the "set +/–" buttons.
• AUTO: If an alarm signal is received,
ALARM REC will begin and continue
until the alarm signal is interrupted. The
ALARM REC will then stop (It will not
be cancelled within 1 minute).
• TAPE END: If an alarm signal is
received, ALARM REC will begin and
continue to the end of the tape.
during ALARM REC.
(Refer to 33 page)
16