Resetting Average Growth Table; The Print And Reset Time; Notes On P903, Breeder Program; Set End Time - MS Schippers 4309680 Instrucciones Para El Uso

Resetting average growth table

When the growth day is changed, the average growth table will be reset

The print and reset time

The MS Poultry weighing computer is working in a 24 hour cycle. Each 24 hours, the units will
make a print out if a printer is connected and reset its memory of all collected weighing
information and restart automatically to weigh on the basis of the new calculated expected average
weight. The print time is the same for all plates.
This time is the time the day of growth will increase by one.
Set print time :
1. Set the selector to the "Enter data" position.
2. Push on the "Print" button, "Set print time" "xx:xx" will appear on the display.
3. Set the desired time through the keyboard. (set end time for 901-902-904, 1 minute
shorter than reset time.)
4. Push on the "ENTER" button.
5. Return the selector to the "DISPLAY" position.

Notes on P903, breeder program:

In the heavy breeder program, the user can disable the MS Poultry weighing computer to take birds
into its average calculation in the feeding period and after in the digestion period.
It is recommended to set the End time just before the feeding starts and the Print/Reset Time 50
minutes later.
The MS Poultry weighing computer will remember its average weight until the print time.

Set End Time

After you set the print time, the display is:
PRINT at xx:xx
END at xx:xx
Simply enter the end time and press "Enter".
Important: The MS Poultry weighing computer will not take any birds into its average calculation
between the End time and Print/Reset time.
20
!