Day Of Raising; Number Of Birds; Mortality; Feed - MS Schippers 4309680 Instrucciones Para El Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
Additional push on the uniformity will step the use through the uniformity table with 25 gr step in
the range +500 grams around the average weight. The user will receive number of birds in each
range.

Day of raising

Push on the "Day of raising" button, "dayxx "avrx.xxx" will appear on the display.
The user can receive the average weight of each growth day by pushing the "Day of raising"
button.
The MS Poultry weighing computer will remember up to 100 days for each plate.

Number of birds

Push on "no of birds" button "chickens"xxxxx will appear on the display.
The user will see the number of birds remaining in the house.

Mortality

Push on "mort" button "deathxxx" "prcntxx.x%" will appear on the display
The user will see the total number of dead and the calculated percentage.

Feed

Push on "feed" button "feedxx.xxx" "conver.x.xx" will appear on the display.
The user will see the total quantity feed used in the house and the calculated feed conversion.

Error messages

1. "Plate error" appears on the display. Check the following;
A. Plate is not connected to the main unit. Check the connection.
B. Plate is out of order. Try to connect another plate. If plate error will disappear - plate is out
of order.
C. Plate error remain check cable to main unit, if OK, then inside fuse chip is blow out.
D. If all plate show plate error, replace inside fuse.
Important: If the fuse is blow out, one of the cables going to the plate may short circuit.

Maintenance

The MS Poultry weighing computer has a 10-year's battery backup for its memory. The unit will
zero its plate automatically.
Do not clean the plate during growing period.

Cleaning of plate

1.
Disconnect the plate from the main unit.
2.
The plate can be cleaned with hot water and soap.
3.
The plastic box can be cleaned with a moisture cloth.
23

Publicidad

Tabla de contenido
loading

Tabla de contenido