Product Features; Auto-Off Timer - UFESA MJ6350 Instrucciones De Uso

• Not to be used on any part of the body
that has undergone surgery
• Not to be used for treating unexplained
pains without first consulting your doctor.
• If you have any doubts about your state
of health, consult your doctor before using
this product.
• Not to be used on areas with sensitive
skin or circulatory problems Unsupervised
use by children or handicapped persons
may be dangerous
• If you have a pacemaker fitted, consult
your doctor before using this product.
• Not to be used for longer than 15
minutes.

PRODUCT FEATURES:

- An alternative to massage.
- Recuperate from fatigue.
- Stimulate blood circulation.
- Relieve tired muscles.
- Relax tense muscles.
- Alleviate neuralgia and muscle pain.
OPERATING INSTRUCTIONS:
Plug the appliance into the mains supply.
Always place the massager on a flat, stable
surface.
Only to be connected to the voltages stated
on the characteristics plate.
Do not switch the appliance on if either
the cable or plug are damaged, if it can be
detected that it is not operating correctly or
if it has suffered any type of damage.
Press the Mode selector / OFF switch
[ ], (8).
The [
(automatic). Select the desired mode,
"Automatic" or [
Automatic mode: Automatically changes
the rate of vibration, intensity and speed. No
manual adjustments possible for intensity or
speed of vibration.
Manual mode: The user can select the
intensity and speed of vibration.
Whenever manual mode is selected the
massage speed and intensity of vibration
are set to high by default.
6530.indd 7
] indicator lamp will light up
].
To adjust vibration speed
Press the [ ] vibration speed selector /
switch (7) to adjust the vibration speed and switch (7) to adjust the vibration speed and switch (7) to adjust the vibration speed and
set the speed to your needs:
Slow.
Medium.
Fast.
Each time the [
selector/switch is pressed the corresponding selector/switch is pressed the corresponding selector/switch is pressed the corresponding
speed indicator will light.
To adjust massage intensity
Press the [ ] massage intensity selector
/ switch (6) to adjust the intensity of the / switch (6) to adjust the intensity of the / switch (6) to adjust the intensity of the
massage. The settings available are:
High intensity.
Low intensity.
Each time the [
selector selector / / switch switch
corresponding massage intensity indicator
will light.
To stop the appliance during massage, press To stop the appliance during massage, press
the mode selector / Off switch [
1ª Press switches the appliance on in the
[ ] position (automatic).
2ª Press switches over to the [
position.
3ª Press, switches the appliance off.
Unplug the appliance from the mains.

Auto-Off timer:

The timer starts as soon as the appliance is
switched on and will automatically detain
the massage function after 15 minutes.
The timer is activated in both the [
and [ ] positions.
APPLICATIONS
Follow the tips below to use the massager
correctly:
To massage the soles of the feet, sit in a chair
and place your feet on the vibrating pads.
Focus the massage on the soles to alleviate
any stress in the feet. (Figure -1)
To massage your legs, lie down and rest your
calves on the vibrating pads. (Figure -2)
WARNING: Excessive massaging may
produce adverse effects Limit massage
time to a maximum of 15 minutes.
Do not halt the vibration mechanism by
pressing down on the pads excessively
during massage.
] vibration speed
] massage intensity
is is pressed pressed the the
], (8).
]
]
19/7/06 10:10:48