cecotec CONGA TURBOCICLONIC Guía De Usuario página 17

• Make sure that all the product's packaging has been removed.
• Prepare the appliance according to the function you wish to use.
Vacuuming function:
• Fit the hose unit to the vacuum cleaner's air intake.
• To disconnect the hose unit from the vacuum cleaner, press the two buttons on the
hose joint at the same time and pull outwards (Fig. 1).
Insertion of accessories into the appliance's grip:
• The appliance's grip is designed in such a way that it allows the insertion of the following
accessories: (use the combination that best meets your requirements)
• Extendable extension tube: Designed to provide access to surfaces which are out of
reach and make floor cleaning comfortable, its length can be adjusted by using the
adjustment control.
• Lid: Specially designed for cleaning floors (both rugs, carpets and hard floors), its base
has a retractable brush that can be adjusted to two heights for greater efficiency on
these floors.
• Corner brush.
• Multipurpose brush: specifically designed for little openings and hard-to-reach corners.
• Brush for fabric: specifically designed for textile surfaces.
• Parquet brush.
Use:
• Take the length of cable required out of the housing.
• Connect the appliance to the mains.
• Turn the appliance on using the on/off switch.
Once you have finished using the appliance:
• Turn the appliance off, using the on/off switch.
• Unplug the appliance to the mains.
• Retract the cable by pressing the roller cable button and guide the cable into the
appliance.
• Clean the applianceLimpiar el aparato.
ENGLISH
17