Waste Management - GYS Smart Printer Module Manual De Uso

EN
SMART PRINTER MODULE
SAFETY INSTRUCTIONS
This manual contains safety and operating instructions, to be
followed for your safety.
Please read it carefully before using the device for the first time and
keep it for future reference.
Read and understand the following safety instructions before use.
Any modification or update that is not specified in the instructions
manual should not be undertaken.
The manufacturer is not liable for any injury or damage due to non-
compliance with the instructions featured in this manual.
If there is any issue or uncertainty, please consult a qualified
individual to operate the equipment correctly.
This device may only be used for ticket printing and/or data
transmission within the limits indicated on the device and manual.
The operator must follow the safety instructions. In case of improper
or unsafe use, the manufacturer cannot be held liable.
Do not use the charger if the mains cable or plug is damaged.
Do not place the unit near a heat source/direct sunlight and durably
high temperatures (above 50 ° C)
This machine must be connected to an earthed socket.
Maintenance :
• Maintenance should only be carried out by a qualified person.
• Warning ! Always disconnect from the mains before performing
maintenance on the device.
• Do not use solvents or other aggressive cleaning products under
any circumstances
• Clean the surfaces of the unit with a dry cloth.
Regulations :
• The Machine is compliant with European directives.
• The declaration of conformity is available on our website.
• EAC Conformity marking (Eurasian Economic Community)..

Waste management:

• This product should be disposed of at an appropriate recycling
facility. Do not throw away in a household bin..
7